Your enquiry 1. Information from customer. Company name (required) Date Your name (required) Your Email (required) What will be produced with the product delivered from Luma Metall: What function has the delivered product in your product: How will Luma Metal’s product affect your product properties? For example. Conductivity, Tensile Strength, Surface etc.: What will be produced with the product delivered from Luma Metall: Type of wire material: Yearly need: 2. Technical requirements. Diameter (including plating if applicable) (excluding out of roundness) The diameter is verified by checking the weight of a 200mm long wire length: Nominal value Tolerance Tensile Strength (including plating if applicable): Nominal value Tolerance Elongation %: Nominal value Tolerance Straightness cm/100cm Suspend a 100cm length of wire vertically with no additional load. The wire will shrink somewhat and the free hanging length could then for example be 80cm. The straightness is then in this example indicated as 80cm/100cm: Nominal value Tolerance Electrical resistance : Nominal value Tolerance Out of roundness When the wire is rotated 360 dgr, out of roundness is measured in percentage as follows: (2(D-d) x 100)/(D+d) D = the maximum diameter, d = the minimum diameter Nominal value Tolerance 2:2 Surface requirements Surface quality: cleaned, etched, polished, oxidised, black Tolerance: YesNo If the answer is Yes go to point 2:3. If the answer is No go to point 3. 2:3 Coating Flash material (pre-plating): NickelGold Final coating material : NickelGold Parameters Coat thickness: Nominal value Tolerance Specific requirements on coating finish: YesNo If Yes: Describe the finish Spooling requirements Type of spool: K40K50K63K100R3R15R24 You will find more information about spools at our homepage www.luma-metall.se 3. Spooling requirements Your re-spooling force Nominal value Tolerance Your re-spooling speed Nominal value Tolerance 4. LabelLuma standardSpecial label 5. Packaging requirementsLuma standardSpecial demands [recaptcha size:compact] I accept that my personal information will be used by Luma for internal use and none of my information will be given to third parties.
